South Bend Roof Pros provides professional chimney flashing in South Bend, IN for residential and commercial properties across Michiana. Chimneys leak more than any other single detail on the roofs we work on, and in this city they leak for a reason connected to snow rather than rain. The upslope side of a chimney is a wall standing in the path of everything coming down the roof.
Snow stacks against that side and stays there long after the open slopes have cleared, because the masonry shades it and the geometry traps it. A north-facing chimney can hold a drift against it well into March. So the flashing on the high side is not being asked to shed a rain shower. It is being asked to hold back a standing drift that melts slowly from below for weeks.
That is why we treat a cricket as required rather than optional. Code calls for a saddle above chimneys wider than 30 inches; on the houses here we build one over anything past about 24, framed to the same pitch as the roof, decked, membraned, and flashed into the field. It splits the drift and moves the meltwater around both sides instead of letting it pool against brick.
The flashing itself is two separate pieces and that distinction is where most failures start. Step flashing goes in course by course with the shingles, one piece per course, lapped up the masonry. Counterflashing is a separate metal let into a reglet cut into the mortar joint, folded down over the step flashing and sealed at the cut. The two are never a single bent piece and never fastened through into the brick face.
What we tear off constantly is roofing cement smeared over the whole joint. It looks like a repair for about two seasons, then it shrinks, cracks, and channels water straight into the joint it was hiding. If a previous contractor solved your chimney leak with a bucket of black mastic, the leak is still there, it is just no longer visible.
Masonry condition is part of the job. Freeze cycles work on old mortar joints and on a cracked crown, and water entering through the brick above the flashing line will still show up on your ceiling. We will tell you when the fix is a mason rather than a roofer, and we would rather hand that off than sell you flashing that cannot solve it.
Our licensed and insured team brings the right materials and equipment to every job — self-adhered ice-and-water membrane, cap-nailed synthetic underlayment, SBS-modified asphalt shingles, 24-gauge standing seam panels, mechanically fastened 60-mil TPO, fully adhered EPDM membrane — and backs the work with a written workmanship warranty. We serve South Bend and nearby communities including Mishawaka, Elkhart, Goshen, Michigan City.
What We Handle
Everything our chimney flashing in South Bend covers
One crew, one point of contact, and the full range of chimney flashing work in South Bend, IN. If it is on this list we do it in house rather than handing it to a subcontractor:
- chimney flashing repair
- step flashing installation
- counterflashing reglet
- chimney cricket saddle
- chimney leak repair
- masonry chimney tuckpointing
- chimney chase cover
- lead flashing chimney
- roof cement failure
- chimney crown repair
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our South Bend services.
Materials, equipment and how we do chimney flashing
The difference between chimney flashing that lasts and chimney flashing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with self-adhered ice-and-water membrane, cap-nailed synthetic underlayment, SBS-modified asphalt shingles, 24-gauge standing seam panels, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every South Bend job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Michiana means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do chimney flashing outside South Bend
South Bend Roof Pros covers South Bend and the surrounding communities of Michiana. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Chimney Flashing in Mishawaka, IN — St. Joseph County, population 51,063
- Chimney Flashing in Elkhart, IN — Elkhart County, population 53,923
- Chimney Flashing in Goshen, IN — Elkhart County, population 34,517
- Chimney Flashing in Michigan City, IN — LaPorte County, population 32,075
- Chimney Flashing in Granger, IN — St. Joseph County, population 30,337
- Chimney Flashing in La Porte, IN — LaPorte County, population 22,471
Start on the South Bend Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why South Bend Chooses South Bend Roof Pros
- ✓We inspect the attic before the roof, because frost on the underside of the decking predicts a failure months before the shingles show it.
- ✓Every scope states the deck treatment, fastening pattern, eave membrane run past the wall line, and the intake-to-exhaust ventilation figures.
- ✓We carry self-adhered ice-and-water membrane past the interior wall line, which on a deep overhang means two courses rather than the single course most bids assume.
- ✓Cold-weather installs get hand-sealed tabs at every rake, eave, ridge, valley and penetration instead of waiting on spring sun to bond the adhesive.
The standards behind chimney flashing
Quality here is not a matter of opinion — it is written down. The chimney flashing work we do in South Bend follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every chimney flashing project in South Bend gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free chimney flashing free estimate in South Bend, or request a quote and we'll get right back to you.